Product Description

linear taper potentiometer

Debon Electorinics are leading potentiometer supplier in china.we are specializing in producing and developing potentiometers,Encoders,Swithes for many years.With the customers of Behringer,Edifier,Haier,etc.With competive price and high qualiy. 

Slide potentiometer specification: 

1. Metal housing.

2. Center detent opition.

3. Plastic slide rod type 

 

Electronics characteristics:

Total Resistance:500Ω-1MΩ;

Total Resistance tolerance:+/-20%;Resistance Taper:A. B.C.D etc.

Withstand voltage:5mm~15mm:1 minute at AC 100V,20mm:1 minute at AC 250V

Insulated Resistance:5~15mm:More than 50MΩ at DC 100V;20mm:More than 50MΩ at DC 250V.

Sliding noise: less than 100mV.

Residual Resistance: Term.1~2:less than 10 Ω ;Term.2~3: less than 10Ω

Gang Error (Dual Unit)：-40dB~0dB±3dB

Rated Voltage:Taper B:4mm/5mm AC 50V,10mm/15mm AC 100V,20mm:AC200V;

Other Taper:4mm/5mm AC 25V,10mm/15mm AC 50V,20mm:AC 150V; ;

RatedPower(Single Unit/Dual Unit):Taper B:4mm/5mm 0.01W/0.05W,10mm:0.03W/0.015W,15mm:0.05W/0.025W,20mm:0.1W;

Other Taper:4mm/5mm 0.025W/0.012W,10mm:0.015W/0.01W,15mm:0.025W/0.01W,20mm:0.05W

 

Mechanical characteristics:

Slide Torque:5~90gf.

Stopper strength:2.5gf(from the base level to a point of 2mm).

Click torque:30~160gf.

Lever Push-pull Strength:1.0Kgf Min at 10 Sec.

Level Wobble:2(2XL)/25mm max.(L:Level length both sides)

 

Debon potentiometers are rarely used to directly control significant power (more than a watt), since the power dissipated in the potentiometer would be comparable to the power in the controlled load (see infinite switch). Instead they are used to adjust the level of analog signals (e.g. volume controls on audio), and as control inputs for electronic circuits. For example, a light dimmer uses a potentiometer to control the switching of a TRIAC and so indirectly control the brightness of lamps.A potentiometer informally, a pot, is a three-terminal resistor with a sliding contact that forms an adjustable voltage divider. If only two terminals are used (one side and the wiper), it acts as a variable resistor or rheostat. Potentiometers are commonly used to control electrical devices such as volume controls on audio equipment. Potentiometers operated by a mechanism can be used as position transducers, for example, in a joystick.

Payment Terms︰ T/T,Western Union,Paypal